Followers

Showing posts with label Diamond Antenna. Show all posts
Showing posts with label Diamond Antenna. Show all posts

Tuesday, 5 May 2015

Getting mobile again on the 70MHz (4m) Amateur Band

My 4m Band History To Date


In my radio shack I use an ICOM V200T PMR (Private Mobile Radio) rig, putting out around 30W, for my 70MHz or 4m radio activity. I have a professionally manufactured Jaybeam folded dipole above the roof line as an aerial. It is particularly good as it comes complete with a balun and is very well manufactured. I think I purchased the aerial in 1990 - and it has served me well ever since.

I have other PMR rigs in the cupboard - as I used to be very active and enjoyed converting many of them to the Amateur bands. I started using the 4m band in 1989 using a crystal controlled Telefunken radio which I converted from a German Fire Engine - as they were moving away from crystals and on to VFOs (Variable Frequency Oscillators).

It has, however, been about 4 years since I have had a 4m transceiver, or 'rig', in the car and, as the band seems to be getting more popular in this part of the UK once again, I thought it was time to put that right!

Of course, the one 4m remote-head rig I already owned was limited to 20W and had an annoying 90 second time-out timer, which I could not reprogram, so I wanted to use something with a bit more power out! I still have my Pye 4m amplifier but I wanted to cut down on space and wiring in the car - especially as a modern car can be less roomy for all that gear.

A Solution For Mobile Operating


In the UK it is possible to purchase a 'Quad Band' transceiver covering 4 Amateur Bands: 6m, 4m, 2m and 70cm. I purchased mine from the Martin Lynch Group in Staines, London.

This gave me a remote head option capable of running up to 50W of power out to the aerial. Such power would be just right for mobile operation!



It also means that I can occasionally use the 6m band from the car. I already have access to 2m & 70cm band (analogue & digital) from my ICOM ID5100E in the car. You can see the head unit of the ID5100E above the corresponding head unit of the Quad-Band radio in the photo above. This means both radios are very easy to operate from the driving position.



Now, how to power two radios from one heavy-duty socket in the boot of the car ('trunk' for my Stateside readers!) in a safe manner? Well, I am a great supporter of West Mountain Radio products and PowerPoles, so the top photo shows you the fused system I use to accommodate two radios running at the same time. 

The second photo shows the unit in situ, next to the main unit for the ICOM ID5100E radio. You can see the 12v socket clearly feeding the RigRunner. It works a treat!


Here you can see the 4m aerial situated at the back of my car. It is centre loaded, to make the physical height of the aerial smaller whilst maintaining the same electrical length. It works incredibly well!

I have already worked a few stations whilst travelling around Kent and I expect to work a more over the coming weeks.


Here you can see the 4m aerial on the left & the dual-band 2m/70cm aerial on the right - at the rear of my car.

Hope you found that interesting?

More later!

Best 73 de John G0GCQ

Monday, 27 September 2010

Winterising Aerials For The Harsh Weather Ahead

John (M1FEL) and I, a week ago, were taking down the main aerial pole in order to re-attach the full-size Windom HF Aerial ~ as the rope had finally perished.  It was last checked a year ago!
The main HF Windom attaches to the pole seen on the right-hand side
I took the opportunity to winterise the folded 4m band (70MHz) dipole, which you can see reaching out to the left of the main HF pole, to make sure that the internal balun would not see any ingress of water.  All the connections were great from last year but, to make sure, I replaced the rubberised self-amalgamating tape and cable ties.  At the same time, I attached a stainless steel 'Discone' aerial on top of the main HF pole.  Now I can hear the controller (and not just the aircraft overhead) at Lydd Airport & also at Laschenden (Headcorn) aerodrome.  Great improvement!


If you notice, there are other poles sticking up above the small flat roof that my wife & I have.  Looking at the white fibreglass aerial 'nearest' the TV aerial on the chimney, you can see my main 2m (145MHz) & 70cms (433MHz) aerial: 

X510HDN Base Antenna
Specifications:
Band:2m/70cm
Element Phasing:3-5/8l/8-5/8l
Gain (dB):8.3/11.7
Watts:330 (2m) / 250 (70cm)
Connector:Type-N
Weight:5 lbs.
Length:17.2'
Max Wind Resistance:90 MPH



It is really an effective aerial and the coverage is phenomenal from up here!  I am really pleased with this.

X510HDN Base Antenna is the white 'stick' on the right hand side.
The pole to the left of the X510HDN holds a 10m (28>29MHz) fibreglass aerial for DX and Ground Wave working.  When conditions are right, I use this aerial for 10m FM DX (long distance) contacts.  Very efficient, with no measurable reflective power ~ so all power from the radio is effectively radiated from the aerial itself.  All feeder cable to my aerials are 'top-notch' military UHF (Ultra High Frequency) 'spec' ~ which is overkill for the 10m band, but there is minimal loss through the cable!

Finally, the pole on the left-hand side of the photo above shows a 3-element 6m (50MHz) horizontal beam, on top of a rotator, allowing me to turn the aerial to face DX stations around the World.  Above it is a V2000A Tri-band Base Antenna:

Specifications:
Bands:6m/2m/70cm
Frequency (MHz):52-54/144-148/440-450
Gain:2.15dBi/6.2dB/8.4dB
Impedance (nominal):50W
VSWR:1.5:1 (typical)
Power Rating:150 watts
Element Phasing:1/2l/2-5/8l/4-5/8l
Max Wind Rating:112 m.p.h.
Mast Dia. Acceptance:1.2 to 2.4 inches
Length/Weight8.3 ft./2.6 lbs.
Connector:SO-239 Female

This, again, is a very efficient aerial ~ one that I use for 'local' nattering on 6m / 2m / 70cms!


Hanging just this side of the Kent Cobnut Tree is the white centre balun of the HF Windom Aerial.


The other end of the Windom aerial is held aloft by the use of an ex-military high-grade aluminium telescopic mast.
The telescopic pole can be seen extended just beyond the white reclining seat.
You can see the radiating element, the vertical cable running down from the large white balun held aloft, running towards the pump house and then into the main property.  High-grade coaxial cable, again, but the distance from the 'Shack' (Radio Room) to the main feed point is only 30 feet. Nothing for the HF ('Short Wave') bands!


So there we have it!  Ready for the Winter ahead!  Here's hoping for some choice contacts on the Amateur Radio bands.